HOME > NEWS & EVENTS > Company News > Hot products   |   Leave a message

When is the best time to maintenance the mineral powder briquette

Mineral powder briquette making machine is used to suppress a variety of iron, ore, iron oxide, slag, refractory and other equipment.65-manganese casting roll skin. Special heat treatment hardness of up to 58 degrees. Assembled using roll paper, can be replaced after wear.Mineral powder briquette machine with a buffer device, can better protect the device against a hard object impact. Mineral powder briquette machine is designed with an adjustable device so that the two bowl always roll the ball adjustable range, never misplaced.Also it is a energy saving products.
For example: dust, mud pools, scale, slag, iron, aluminum ash, manganese ore, etc. the Mineral powder briquette machine molding materials, energy saving, easy to transport,improve the utilization of waste materials , with good economic and social benefits. When the mineral powder briquette machine press materials,it is easy to be affected by other parts,mainly because relevant parts effect lead pressed shape materials.Such as,if pressure is not enough,in generally powder materials will have many,also briquette machine's roller adjustment,mineral powder briquette press machine is the part that relevanted to pressed materials. When the machine's roller quality is qualified,rollers don't damage,so can ensure forming ball quality,which is the fundamental to ensure ball forming and maintain stable. Mineral powder ball press machine use hot air from the hot air blown into the dryer upper sides of the lower part of the dryer, so that the heat flow from the bottom up, in order to fully absorb the heat of the drying materials to achieve the best drying results , material moisture absorption of heat discharged from the dryer exhaust vent in the middle of the upper part, the upper part of each section of the drying oven with hot air inlet to control air flow regulating vane , the traveling belt by the both sides of the chain drive, the pressure pressure roller ball machine ball press machine equipment plays the most important role , roll skin determines the quality of ball press machine equipment, good or bad, the diameter of the roll paper width , the larger the diameter of the rollers , two rollers greater bite between the entrance , the more the ball on the pressure roller can fill a bowl full of coal feed , which will help improve the molding pressure . However, the pressure roller diameter is too large , it will cause a large body significantly increases the metal material and power consumption, and thus the diameter of the roller is not easy too.
There is likely to affect the molding powder ball press machine design defects, under normal circumstances because the slag pressure ball machine ball and socket design there is a problem , it may be powder ball press machine manufacturing Comparison ball deep , so that the ball is not easy to cause the material from which emerge , there is the process of making the roll paper is not on the roll for finishing the outer surface of the skin .
These are likely to cause effects of the device forming effect. Powder ball press machine in our metallurgical machinery industry is a derivative of machinery and equipment, as widely used in the metallurgical industry, so in the metallurgical industry is still relatively widespread use , powder ball press machine is mainly the pressing of powdered materials An apparatus, relying on the development needs of the development of the metallurgical industry , metallurgical industry is only able to achieve prosperity and development of the state, then our prospects for pressure ball machine equipment is immeasurable it.
Powder ball press machine is in all slag ball press machine is mainly used to suppress briquette machine, it will be powdery or granular coal for pressing, then they have a certain shape ball press machine can transported to other places for use , or for the production of coal briquettes raw bar again for processing, or directly used to use combustion to provide heat for people to use, no matter what kind of approach used in this step is mainly slag pressure the ball machine briquette pressing work . Which can not be offset must have a base, and pay attention to the calibration level , gearboxes need more lubrication, powder ball press machine the best time to repair .

Contact us

  • E-mail: sales@turuimac.com
  • Skype:turuimac-123
  • Mobile: +86-1833-711-6237
  • Tel: +86-371-5666-9277

Subscribe

Stay up to date with latest news from our company.We promise we won't spam you.

Contact us

E-mail: sales@turuimac.com
Sales Department Tel:+86-371-5666-9277
Mobile: +86-1833-711-6237
Skype:turuimac-123
Office Address: Xushui Industrial Park, Zhengzhou city, Henan province, P.R. China.

Copyright© 2015-2016 Zhengzhou Turui Machinery Co., Ltd XML