Introduction to fluorite powder briquette machine
The fluorite power is mainly used as the steel making dissolving agent. As the government starts to be strict about the management of the mine exploitation, it's more and more difficult to exploit the scarce fluorite ore. Therefore, the stacking and spare fluorite powder starts to be applied to replace the minerals. Since powder materials are not easy for transportation and application in the steel plants, they should be first briquetted into balls. The fluorite powder briquette machine is invented for this purpose.
Advantages of fluorite powder briquette machine
The fluorite powder briquetting machine which is familiar with the coal briquette machine and desulfurization gypsum briquette machine can briquette materials including fluorite powder, ore powder, metal powder, coal powder, coke powder etc. With high pressing force, the fluorite powder briquette machine can make products with features of high density, high strength and high hardness. The press rollers of the fluorite powder briquetting machine is made of hard and wear-resisting materials, which prolongs its service life.
Installation and test-run of fluorite powder briquette machine
1. The main body of the fluorite briquette machine should be vertical to the level.
2. The fluorite powder briquetting machine should be installed on the horizontal concrete pedestal and be bolted by the anchor bolts.
3. After installing the fluorite briquetting machine, users should check whether the bolts are loose or the door is fastened.
4. Check the condition of the fluorite powder briquette machine's power configuration, cable and control box.
5. After all the inspection, users can test run the fluorite powder briquetting machine without load. Once the test run goes well, we can start the normal production.
Material requirement for fluorite powder briquette machine
1. Materials particle sizes are within 80-200mesh. 2. No metal is allowed to mix among the materials, or it will damage the briquette machine's roller surface. 3. Enough feed can guarantee the briquetting efficiency. Notice: The briquetting process will result in abrasion to the roller, so users should pay much attention to the making materials of the rollers. We prefer those machines made of wear resisting alloy.